Hyundai Wi-Fi controller - Automatic Generator Control Modules


GC logo
MENU
Go to content

Hyundai Wi-Fi controller

Wi-Fi control

Wi-Fi Hyundai generator compatible auto start controller.


Compatible apps:

This device allows to start, run and stop the Hyundai generator from your smartphone connected to wi-fi or mobile internet.
The Smart Life app has a range of timers which can be set up to start, run and stop your generator automatically.
Important note:
The Hyundai wi-fi controller has to be within the range and connected to wi-fi signal.
Your Hyundai generator should have the ATS controller fitted. If not, please order one (any) from our website: (link 1) or (link 2)

Important note!
Please consider using the trickle charger constantly connected and powered from mains to keep the engine starting battery fully charged. The smart Wi-Fi switch needs the engine starting battery power (approx. 35mA) to monitor the wifi network 24/7. So without trickle charger it will discharge the engine starting battery within days or weeks.

Product compatibe with:


DHY6000SE
DHY6000SELR
DHY8000SE
DHY8000SELR
DHY8000SELR-T (Three-phase)
DHY8500
DHY8600
It also fits to Ford Model FD7200 generator.
This part may also fit Yanmar L90 and L100 derivatives, such as Kipor.

Checklist before using the device

  • Your smartphone or tablet has connected to a 2.5G Wi-Fi with internet.
  • Your Wi-Fi Hyundai generator compatible auto start controller is within the range of your Wi-Fi signal
  • You have the correct Wi-Fi password.
  • Your smartphone or tablet must have access to APP Store or Google Play.
  • Make sure your router is MAC-open.

USER GUIDE


  1. Start with "Smart Life" app: (find this app on Google Play or App Store and install it to your smartphone or tablet)
  2. Register your Smart Life account (it is free!)
  3. If you have your Smart Life account, just log in.
  4. Plug in your ATS Hyundai Wi-Fi controller to your ATS generator socket. The ignition key switch has to be in OFF position.
  5. Remove the plastic lid from the protective enclosure, press and hold the "pairing button" for about 5 sec until the blue LED start blinking fast:
  6. Enter the App, tap "+" in the upper right of the page to enter network connection page.
  7. Please make sure the device's indicator light flashes rapidly (2 times per second). Tap to go on to the next step.
  8. Input your Wi-Fi name and password.
  9. Name your device.
  10. When Wi-Fi LED is on, the device is online. Start to control your generator now!

Parameters:

DC Supply: 12 VDC (generator battery)
Max. Standby Current: 35 mA @ 12 V
WiFi: IEEE 802.11 b/g/n 2.4Ghz
Dimensions: 85x58x33mm
Operating Temperature Range: -30 to +70°C.  



Back to content